Around the clock, around the town, around the world.
Wide Band Communications Receiver DJ-X11E/T
Listen to the world with this pocket-size multi-mode receiver!
2VFO simultaneous RX Main-band coverage: 0.05?`1,299.99995MHz all mode AM/FM/WFM/SSB/CW (BFO for SSB/CW receive. An external antenna required for practical HF monitoring. Internal bar antenna for AM broadcast reception and earphone antenna feature inclusive.) Sub-band coverage: VHF:118?`171MHz/UHF:336?`470MHz in AM/NFM 1200 memory channels with adjustable memory banks using utility freeware (optional PC cable required) IQ signal and Discriminator output features: DJ-X11 has an IQ signal output that can be used with 3rd-party software to operate as a SDR. 10.7MHz IF discriminator signal can be used with other receiver-related software available on the net such as AIS-plotting. Voice-guidance system reads entering/entered frequency in English Easy-to-use twin dials Pocket size unit measures 61 (W) x 106 (H) x 38 (D) mm / 2.4 (W) x 4.17 (H) x 1.50 (D) in (without projections) Rigged Polycarbonate body with rubber protectors Selectable tuning steps: 0.05/0.1/1/5/6.25/8.33/9/10/12.5/15/20/25/30/50/100/125/150/200/500kHz/1MHz Various scan modes: Preset, programmed, memory, VFO and tone scan 3 selectable scan speeds (VFO: 25ch/s, 33ch/s, 100ch/s, Memory: 4.5ch/s, 8.3ch/s, 20ch/s) TSQ and DCS decode Wire remote-control using optional EDS-12 Long-lasting 1800mAh Li-Ion battery pack provides nearly 15 hours of operation at full audio output in a single RX mode 1200 Alphanumeric (up to 16 characters) memory channels Additional 100 memory channels are available for each Dual-mode memory, Search-pass, Priority monitoring and Programmed Scanning pairs Large, brightly illuminated full dot-matrix LCD and keypads Dual channel-scope (Alinco's patented spectrum-analyzer alike feature) Frequency counter and flash tune "Bug detector" function searches for hidden transmitters Illuminated keypad for comfortable operation Standard Drop-in charger fully charges empty EBP-74 in 4 hours RF gain and attenuator for both main/sub VFOs Analog inversion-scramble decoder***
* Cellular frequencies blocked on T model sold in USA, unblocked K model available in Canada and for authorized US users with proper documentation
* Operating times may vary subject to usage and settings. High-grade alkaline cells recommended.
* Inversion-scramble decoder is available in E-version only
About PC connection:
ERW-7 allows you to use clone or utility software only. ERW-8 enables the use of both clone-utility AND real-time control software.
Both types of software are available for download at no charge from a link below. To use 3rd party SDR freeware, you will need to purchase a 3.5mm stereo mini-plug cable for connection to a PC. Functions are not guaranteed when used with 3rd party software. (ERW-4C serial cable is usable as a replacement to ERW-7 but it doesn't support firmware-update operations of DJ-X11.)
Indicative battery duration:
Approx. 35 hours (FM, single VFO, AF10% THD, 1 min RX/4 min Stand-by/EDH-36 (with Alkaline cells) or EBP-74) Approx. 15 hours (FM, single VFO, Max AF outputEBP-74)
(typical value within the band: 10dB S/N:AM/SSB/CW 12dBSINAD:FM/WFM): |
Sub-band: 118~136MHz (AM) -3dBu 136~170MHz (FM) -14dBu 336~470MHz (FM) -14dBu *225~335.995 MHz in AM/FM may be usable although out of specification and warranty. Sensitivity is better closer to 336MHz. This band is closed at the default setting, |
|---|---|
Specifications subject to change without notice or obligation. Cellular frequencies blocked on USA model. Unblocked versions available with proper documentation for authorized users only |
|
Standerd Accessories
Instruction manual / Whip antenna (EA-154) / Li-Ion battery-pack (EBP-74:1800mAh, 3.7V) / Belt-clip (EBC-23) / hand strap / Drop-in charger kit EDC-174A (120V) or EDC-174E (220V) / Dry cell case (EDH-36) * May vary, please ask your dealer before purchase
Optional Accessories
EBP-74: Li-Ion battery pack for spare EDC-174: Drop-in charger stand for spare EDC-139: AC adapter (T/120V) for spare EDC-140: AC adapter (E/230V) for spare EDC-141: AC adapter (UK-plug/230V) for spare EDH-33: Cigar-plug DC conversion cable (12Vdc/24Vdc to 6Vdc) EDH-36: Dry cell case (3 AA cells) for spare EDS-12: Wire Remote-controller EME-26: Curly-cord Earphones EME-6: Straight-cord Earphones ERW-8: Mini USB/USB ports PC interface cable (Full-functions) ESC-50: Soft case ERW-7/ERW-4C: USB and serial PC connection cables (for clone-utility software only)
Download
Firmware download
Software download
Brochure download (PDF:260KB)